How do users connect to the internet

Most broadband services are provided by a phone or cable company. Contact your local phone or cable service providers to see if broadband is available in your area. If broadband service is available in your area, the company can provide you with the hardware e. This hardware usually connects to a Network card RJ connector on a computer using a Cat 5 network cable. If your provider does not offer a wireless router , you can purchase a router to share your Internet connection with multiple computers and devices.

Some broadband ISP companies send a technician to your home and set up Internet service to your computer. You may also use your smartphone to connect to the Internet by tethering , a process that allows it to act as a wireless access point.

Configuring your phone and computer for Internet service differs depending on your phone's operating system and manufacturer. Check online for specific instructions for the tethering software and smartphone you are using.

However, not all smartphones are capable of tethering, and not all cell phone carriers allow smartphones on their network to be used for tethering. Before tethering your smartphone, we recommend contacting the phone carrier to see if it supported and how much they charge. You don't necessarily need to buy a router to connect to the Internet. It's possible to connect your computer directly to your modem using an Ethernet cable. Also, many modems include a built-in router , so you have the option of creating a Wi-Fi network without buying extra hardware.

Once you've chosen an ISP, most providers will send a technician to your house to turn on the connection. If not, you should be able to use the instructions provided by your ISP—or included with the modem—to set up your Internet connection.

After you have everything set up, you can open your web browser and begin using the Internet. If you have any problems with your Internet connection, you can call your ISP's technical support number. If you have multiple computers at home and want to use all of them to access the Internet, you may want to create a home network , also known as a Wi-Fi network. In a home network, all of your devices connect to your router , which is connected to the modem.

You may need an ethernet cable to get online. If the internet is slow or won't connect, you may be out of range of the router or hotspot. Try moving closer to the source. If the network isn't showing up, you may be out of range, or the network may be down.

Try moving closer or rebooting your router. You can also try putting your router up on a higher shelf to boost the signal. Method 2. Get an ethernet cable and any needed adapters.

Many recent devices can connect directly to the router via an ethernet cable. However, some aren't built to do that. Laptops, for example, often don't have components for using ethernet. For that reason, make sure you get any adapters you may need for the ethernet cable to ensure that you can use it.

Ethernet cables are all different; for example, a Cat-5 or Cat-5e cable runs at slower speeds than a Cat However, it's also largely dependent on the router's connection and how many people will be connecting to the network at once.

Unless you're doing very, very intensive upload work, you're probably not going to need a Cat-6 cable if you're the only one on the network. You cannot connect a mobile device e. Connect one end of the ethernet cable to the broadband source. The broadband source will most likely be a router, but in some cases, it may be a modem. In either case, you'll need to plug in one end of the ethernet cable to the broadband source to ensure that the computer will connect.

Connect the other end of the cable to the computer. Find the ethernet jack on your computer and plug it in. This jack will typically be located on the back of the computer, where the other components plug in. If your computer doesn't support ethernet, you'll need to make sure the computer is connected to the adapter, and then connect the cord via the adapter. Access your computer's settings. You'll need to ensure that the computer is set to recognize the ethernet, rather than wireless.

Most likely, you'll have to turn off your wireless connection to ensure that the computer recognizes the ethernet connection instead. Open up a page in a web browser and see if it loads.

Some web pages can take longer to load than others, and others crash sometimes, so you may want to try and load a reliable website e. Troubleshoot if you can't connect. Ethernet is more reliable than Wi-Fi, but that doesn't mean that things still can't go wrong. If you're having trouble with the ethernet, it can stem from many problems, but make sure that the basics e.

Check if the router is having trouble, and reboot it if so. Contact your ISP if resetting the router doesn't work, but the cord and computer's ethernet connection work fine. Rarely, your computer's ethernet card may turn out to be defective. If this is the case, contact the seller of your computer or the computer's manufacturer.

Method 3. Understand that dial-up internet is no longer widely supported and it will be very difficult to do certain activities on the internet with this type of connection.

Because dial-up internet has fallen out of use in favor of broadband internet, it's not common to see instructions for connecting to dial-up internet anymore. If you want to do some very serious internet browsing, it will be best to find a Wi-Fi hotspot in a public location. However, dial-up is still commonplace in a few rural areas, which means that you may find yourself needing to connect to it.

Ensure that you can connect to dial-up. Dial-up internet requires the use of a phone line, and can only connect one person per phone at a time. Key Takeaways People can access the Internet in a variety of ways. People access the Internet in a variety of places. People use the Internet in many different ways e. Exercise Marketing is about conversation.

List a few examples of online conversations you have noticed as a user.